GS-6030 TABER abrasion testing machine

Focus on testing instrument research and development for 10+ years

Main: equipment for experiments of luggage testing, environment, fatigue, tensile pressure, wear resistance and compression

Service Hotline:

+86 183-2081-2386(Preferred)
+86 0769-83697757

4dhcpmingchen

Location: index -> Products -> Waterproof and breathable fabrics -> GS-6030 TABER abrasion testing machine

[View Original] [BACK]

[Previous] [Next]

Application: Suitable for wear resistance test of leather, cloth, paint, paper, floor tile, composite board, glass, natural rubber, etc. Use the specified type of grinding wheel, and load a certain weight to wear, to take out the specimen after the specified number of revolutions, observe the condition of the specimen after grinding or compare the weight before and after the test.

Wear index calculation formula = wear loss weight ÷【 number of test turns ×1000】

Grinding wheel for different specimens

daub Material	A surname Brick	A surname Board	plastic Glue	Cloth
CS-10, CS-17	CS-17, H-18	CS-32, CS-33	H-18, H-22, CS-17	H-18, H-22, CS-17

Technical specifications:

Abrasive wheel	Available grinding wheel models: H-18, H-22, CS-10, CS-17, S-32, S-33
Center spacing	Center distance between the left and right wear wheels: 63.5mm
Test piece spacing	Distance between wear wheel and test disc center 37 38 mm
Test revolutions	60 R.P.M.
Test load	250g, 500G, 1000g.
Frequency Settings	0~999999 Automatic shutdown.
Auxiliary accessories	Test cutter, grinding wheel set, pre-ground sandpaper, vacuum cleaner.
Machine size	334330cm
Machine weight	20 kg
Power supply	AC -220V 50Hz or 60HZ; 2A.